Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.
PrintE-mail
DNQ18AS22W25 DC 24V 2A 1500RPMDNQ12ASO8W15 DC24V 1.1A 2500RPM

Chip Resetter for Epson 9 pin cartridges
View Full-Size Image


Chip Resetter for Epson 9 pin cartridges

Price per Unit (piece): €10.00 (including 21 % tax)

Ask a question about this product

  • Reset to gain extra prints or reset to refill.
  • Just place over the chip and wait for the green light!
  • Comes with battery installed and is ready to use.
  • Battery is replaceable.
  • An alignment tool included.
  • Before ship, every resetter we check on cartrige.
  • This chip resetter is designed for Epson cartridges but will also reset most compatibles and our resettable cartridges.

The ink level of EPSON intelligent cartridge is recorded in the chip IC, which accurately records and controls the ink level.
It cannot be reused even though the empty ink cartridge is refilled, and it results in high expense.
Chip resetter reset the chip on the cartridge into a full mode. In this way, empty cartridge can be reused after the ink is refilled, save money 90%.
The resetter is versatility; it can automatically identify the type of ink cartridge, and then reset the chip on the cartridge into a full mode.

Chip Resetter compatible with printers:

  • Epson Stylus CX4400 / CX4450
  • Epson Stylus D120 / D78 / D92 / DX4000 / DX4050 / DX4400
  • Epson Stylus DX4450 / DX5000 / DX5050 / DX6000 /DX6050
  • Epson Stylus DX7000 / DX7400 / DX7450 / DX8400 / DX8450
  • Epson Stylus DX9400F / DX595
  • Epson Stylus Photo R260 / R265 / R280 / R285 / R290
  • Epson Stylus Photo R360 / R380 / R390
  • Epson Stylus Photo 1400 /1410 / SP1400 / SP1410
  • Epson Stylus Photo RX560 / RX580 / RX585 / RX590 / RX595
  • Epson Stylus Photo RX610 / RX680 / RX685 / RX690 / RX700
  • Epson ME1 / ME100 / PX-A7250 / PM-D870 / PM-G850

Or with ink cartridges:

  • T071 / T077 / T078 / T079 / T080 / T088
  • T0711 / T0712 / T0713 / T0714
  • T0771 / T0772 / T0773 / T0774 / T0775 / T0776
  • T0781 / T0782 / T0783 / T0784 / T0785 / T0786
  • T0791 / T0792 / T0793 / T0794 / T0795 / T0796
  • T0801 / T0802 / T0803 / T0804 / T0805 / T0806
  • T0881 / T0882 / T0883 / T0884
  • T071140 / T071240 / T071340 / T071440
  • T077120 / T077220 / T077320 / T077420 / T077520 / T077620
  • T078120 / T078220 / T078320 / T078420 / T078520 / T078620
  • T079120 / T079220 / T079320 / T079420 / T079520 / T079620
  • T080140 / T080240 / T080340 / T080440 / T080540 / T080640
  • T088120 / T088220 / T088320 / T088420

Our products are guaranteed to be free from defects or we will ship you a new product or refund your money.

All refund must be within 30 days of purchase.

TROUBLESHOOTING
1.After the red LED flash, it stays on and doesnt turn green
a). The pins on the resetter are not in good contact with the chip on the cartridge. The contact may be dirty or oily.
b) Cartridge chips are broken.
2. Print line after filling ink
a). The quality of the ink you are using may be inferior. We recommend using inks that are specifically matched to Epsons original colors and other characteristics. (Especially if you are printing digital photographs.)
b). Air bubbles entrapped in ink. Allow the cartridge to rest for 24 hours with the ink exit nozzles facing down before using.
c) Dont use vacuum refill method to fill the ink into Epson original cartridge.

Refill instruction (will come with resetter):

1. Drill hole on the cartridge which is use up or nearly use up. Attention: Filling ink when 10% Ink left in the cartridge, then use the resetter to reset chip. In this way, it can prevent original chip becoming compatible chip (the printer show it is not original cartridge for each printing), avoid original cartridge sensor broken easily. (picture 4)
2. Stuff the rubber on the air hole. ( Picture 5 )
3. Insert the vacuum refill tool into hole of cartridge, take up and down the refill tool, the Cartridge can be full after doing it several times. ( Picture 6 )
4. Stuff the rubber on the filling hole, take out the rubber in the air hole. ( Picture 7,8 )
5. Use the resetter to reset it, Cartridge can be used again.


Availability

In Stock: 9

Usually ships in:

3-7d2.jpg


Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.